Initialize the power window in the following procedure to reactivate such functions. 1. Close the driverā€™s door. 2. Turn the ignition switch to the ā€œONā€ position. 3. Open the driverā€™s side window halfway by pushing down the power window switch. 4. Pull up the power window switch and close the window completely. Heat up the bottom of the wire with a lighter/candle/heating device, being careful not to burn your fingers. Dip fingers in beer to ease burning sensation. Drink greasy beer. Insert the heated wire in the holes. The heat will melt the plastic around it, and affix the wire to the switch:
PetroHD. 13 posts Ā· Joined 2012. #6 Ā· Jan 8, 2013. I am having a similar problem. My driver side window will not go up. All other windows work with the driver side window control as well as there perspective controller. So off goes the door panel and out comes the multi meter. I have voltage at the motor when I engage the switch.

The air-cooled Porsche 911 had power windows starting back in 1974. Many of these cars can have window switch issues due to wiring problems with aftermarket alarms, audio modifications, or simply due to old age. Fortunately they are fairly straightforward to replace. Read on to find out how. Porsche model years applicable:

The Nissan power window problems can be corrected by performing a re-initialization process. Hereā€™s how to perform the re-initialization. 1) Turn the IGN to ON and open the window fully 2) Close the window until it hits the stop and the top of the channel and CONTINUE holding the window switch for an additional 4-secs. 3) Repeat the process
Freewill. 2710 posts Ā· Joined 2020. #12 Ā· Feb 23, 2021. slowindown said: A guy on the commander and defender forum posted this: "Had the same problem and got a new power window switch for Can Am 2020 defender for $28.50 from the OTR Switch Guys 408-252-1544. Just called and they told me what switch I needed. ( Can Am wanted $86 )"
. 160 331 145 180 198 404 101 363

power window switch problem